FLUSH CLEANING
WHIRLPOOL JETTED SPA BATHS
Place plug in bath drain and start filling with hot or cold water.
When bath has filled to 1 inch above the highest jet add 50ml/1.69oz of SPA.GIENE™ as directed.
Turn on the pump and all air switches if applicable and run for 15 minutes.
After 15 minutes turn off pump. Pull plug from drain, and allow water to drain, wipe any excess scum marks/water lines off surface and surrounding area of spa bath while tub is draining.
As the foam and traces of body fat dissipate and go down the drain wipe the tubs surface down with a clean cloth and tap water running.
Once spa is emptied, wipe dry with a second clean cloth.
The spa bath is now hygienically clean and ready to use.
STANDARD BATH CLEANING
SPA.GIENE™ has eliminated the bacteria infection Pseudomonas Aeruginosa from the plug hole of a regular standard bathtub. SPA.GIENE™ will achieve the highest results.
SPA.GIENE™ MULTI PURPOSE CLEANER
SPA.GIENE Multi-Purpose Cleaner can be used with trigger spray or flip top cap.
- Pour 50ml/1.69oz of Spa.Giene™ into a 1 liter/32oz multi-Purpose spray bottle. Fill to the top with water.
- Lightly spray or pour SPA.GIENE™ inside bath and surrounding area. With a damp cleaning cloth, rub over and rinse with water. It can also be used on all surfaces in the home or hotel room.
- Wipe over with a dry clean cloth.
- For deep and hard to manage scum marks, apply SPA.GIENE™ concentrate onto cleaning cloth, rub area and rinse off.
- Wipe over with a dry clean cloth.
NO OTHER PRODUCTS ARE REQUIRED TO CLEAN THE BATH OR ITS SURROUNDING AREA. THE BATH HAS NOW BEEN DISINFECTED AND SANITIZED.
Further Information contact us
